Do it yourself
| ||||
|
Smart Forfour - Video tutorial
Model: Smart Forfour
W454, MK 1
- Years 2004-2006 In this guide we will see how to replace the spark plugs on the Smart ForFour 1.1 petrol. Let's start by opening the engine compartment, remove the casing with the word Smart by unhooking it upwards. To create some useful space for our work phases, we remove the upper part of the filter box, first loosen the metal clamp that holds the intake pipe, using a flat screwdriver or a 7 screwdriver. While we are working, it is advisable to cover the filter box and the mouth of the air tube with a cloth, to prevent dirt, bolts or other from ending up in the intake circuit, causing damage to the engine. Now we unscrew the coil bolt with a female torx wrench or with a ratchet 8 and remove the coil, finally with a 16mm spark plug wrench we take out the spark plug (if you have to buy it, choose a wrench that has the part that holds inside the candle, so when you get the key out of the hole, the candle will also come out). Repeat the operation for all 3 cylinders.
Posted on 14 January 2024 by ScegliAuto
How do you replace the V-belt of the Smart Forfour?
Smart Forfour (2004-2006 / W454, MK 1) In order to replace the serpentine belt of the Smart Forfour, you need to loosen the screws that secure the front wheel to its housing, and then remo
Where is the fuel filter located in the Smart ForFour?
Smart Forfour (2004-2006 / W454, MK 1) In this video we can see where the fuel filter is located in the Smart ForFour, useful in case we need to replace it, a very simple operation. As sho
Where is the Smart Forfour fuse box located?
Smart Forfour (2004-2006 / W454, MK 1) If any electrical device on board the car does not work, the first thing to check is the integrity of the relative protection fuse: obviously it must Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |