Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wheel of a Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Wheel

Before you start, engage first gear and apply the handbrake of your Smart ForTwo. Begin by inserting the jack provided by the manufacturer into the designated hole near the flat tyre, then lift the vehicle. Once done, unscrew and remove the wheel bolts using the appropriate spanner also included in the basic kit. After removing all the wheel bolts, you can take off the wheel. Once you complete this step, you will have successfully disassembled the wheel.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Brake Pads on Smart Fortwo
Removing Rear Brake Pads on Smart Fortwo
Smart (2007-2015 / 451) Replacing damaged brake pads on a Smart Fortwo? Here’s how to remove them. Lift the car on a column lift to the desired height, then remove the wheel…
How to Remove the Wheel of a Smart ForTwo
How to Remove the Wheel of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before you begin, engage the handbrake and put your Smart ForTwo in first gear. Start by inserting the jack provided by the manufacturer into the des…
How to Replace the Wheel on a Smart Fortwo 453
How to Replace the Wheel on a Smart Fortwo 453
Smart (2014-2022 / 453) In this short video, you will find the main guide for removing and replacing the front wheel, which also applies to the rear wheel, of the Smart Fort…

    Frequently Asked Questions

    • Smart 2014-2022 - Where is the Smart spare wheel located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos