Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight Bulb on a Smart ForTwo

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

Start by releasing the front catches that secure the bonnet to your Smart ForTwo, then unclip and remove the bonnet itself. Next, unclip and remove the rear cover of the bulb.

This will give you access to the back of the blown bulb. Proceed to disconnect the electrical connector, then unclip the clip that holds the bulb in place.

At this point, you can extract and remove the bulb from its housing, successfully completing the removal.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Remove the Headlight Bulb on a Smart ForTwo?
How to Remove the Headlight Bulb on a Smart ForTwo?
Smart (2004-2006 / Fourfour1, 454) Start by removing the upper front cover of your Smart ForTwo using the ignition key, then remove the underlying plastic. Next, unclip and remove the …
Replacing Headlamp Bulb on Smart Fortwo
Replacing Headlamp Bulb on Smart Fortwo
Smart (2007-2015 / 451) In this video, change the bulb of the compact Smart Fortwo. The process is very simple and takes only a few minutes: first, remove the engine cover o…
Replacing the Headlight Bulb on the Smart Fortwo 453
Replacing the Headlight Bulb on the Smart Fortwo 453
Smart (2014-2022 / 453) In this short and simple guide, you will find the main instructions for removing and replacing the headlight bulb on the Smart Fortwo 453. First, ope…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos