Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear reverse light bulb on a Smart

Model: Smart Smart 451 - Years 2007-2015
Part: Tail light bulb

Before we can start, we will have to go and open the tailgate of our Smart. So let's start by disengaging and removing the internal side cover in the luggage compartment. After that, we will have to go and unclip the clips that secure the bulb holder to the rear light. By doing so, we will have freed the lamp holder. We then proceed by going to extract the bulb holder, and we will have reached the reverse gear bulb. At this point, we will have to disengage and remove the reverse light bulb, and we will have finished the disassembly. To fit the new reverse light bulb, we will just have to follow these steps in reverse, and we will have completed the replacement.

Posted on 11 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How do I replace the rear light bulb on the Smart 451?
How do I replace the rear light bulb on the Smart 451?
Smart (2007-2015 / 451) In order to replace the rear light bulb of the Smart 451, the tailgate of the luggage compartment must be lowered and the plastic cover located on th…
How to Remove the Rear Headlamp Bulb of a Smart Fortwo
How to Remove the Rear Headlamp Bulb of a Smart Fortwo
Smart (2014-2022 / 453) How to remove the rear headlamp bulb of a Smart Fortwo? Let's look at replacing the damaged part. Remove the plastic panel covering the rear headlamp…
How do you replace the taillight bulb of the Smart car?
How do you replace the taillight bulb of the Smart car?
Smart (2014-2022 / 453) In order to replace the rear headlight bulb of the Smart, you need to open the rear hatch so that you can locate the screws next to the headlight tha…

How to Replace the Lift Supports on a Porsche 911

How to remove and replace the lift supports for the hood on a Porsche 911? Let's see how to replace them in this video: Lift the hood and secure it. Use a screwdriver or metal lever to detach the clips that hold the lift support at both ends (or unscrew the mounting pins). Install the new part onto the sheet metal of the front trunk, securing the lift support with the clips/pins. Proceed in the same manner for the removal/installation of the opposite lift support. Finally, test the gas springs installed earlier.

Watch the video!


by ScegliAuto

More videos