Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to repair the door handle cable on Smart Forfour

Smart - Video tutorial

Model: Smart Smart 454, Fourfour1 - Years 2004-2006
Part: Headlight
Operation: How to repair the door handle cable on Smart Forfour

Let's see in this short video a simple (momentary) solution to be able to repair the door handle cable on a Smart Forfour. First of all we open the front door and start by levering the plastic part of the handle, in order to remove the cover; then unscrew the torx screw that we find immediately below, as shown in the video. Once the handle is removed we will find the broken cable; then let's insert a screw with a clamp between it in order to be hooked to the opening handle mechanism: we will see that in this way we will have temporarily solved our problem!


Posted on 3 February 2024 by ScegliAuto



Disassembly of the external handle and repair of the Smart Fortwo 451
Smart (1998-2007 / 450) In this video tutorial we will see how to remove the external door handle and how to repair it on a Smart Fortwo first series. First we open the fron
Removing the Smart Forfour external door panel
Smart (1998-2007 / 450) In this video tutorial we will see how the main steps and instructions can be used to remove the external door panel of a Smart Forfour. First we ope
How do I remove the outer door panel of the Smart Forfour?
Smart (2004-2006 / 454, Fourfour1) In order to remove the outer door panel of the Smart Forfour, the side trim of the outer door handle must be removed. In this way it will be possible

    Frequently Asked Questions

    • Smart 1998-2007 - How do you change the light bulb on a Smart? Read Answer
    • Smart 2007-2015 - How do I replace the parking light bulb on the Smart 451? Read Answer
    • Smart 2014-2022 - How to remove the Smart headlight? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos