Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the interior ceiling lights on the Smart Fortwo 451

Model: Smart Smart 451 - Years 2007-2015
Part: Interior dome light bulb

In this video tutorial we will see how to remove and replace the interior ceiling lights on the Smart Fowtwo first and second series, namely the 450 and 451; the procedure is also valid for Forfour. First of all we get on board the car and we go to disassemble our ceiling light; to do this we pry the sides with something thin, in order to unhook it, as shown in the video. At this point we are going to remove the torpedo bulb, replacing it with the new one; we just have to insert it correctly and reassemble everything, applying the reverse procedure of disassembly!

Posted on 23 September 2021 by ScegliAuto

Video tutorial

Related tutorials

How to install the clutch actuator on the Smart Fortwo 451
How to install the clutch actuator on the Smart Fortwo 451
Smart (2007-2015 / 451) In today's video tutorial we will see how to install the clutch actuator on the Smart Fortwo 451, following the instructions below. First of all we l…
How to remove the third stop of a Smart ForTwo 451
How to remove the third stop of a Smart ForTwo 451
Smart (2007-2015 / 451) Before we can start, we will have to get out of the cockpit of our Smart ForTwo 451, and then head towards the rear of the car. So let's start by uns…
How to replace the air filter of the Smart Fortwo 451.
How to replace the air filter of the Smart Fortwo 451.
Smart (2007-2015 / 451) In this new mini guide dedicated to your Smart Fortwo 451 (year 2012), we will discover how to replace the air filter correctly and without the need …

How to Remove the Cabin Filter from a Nissan Juke

In this video, let’s see how to remove the cabin air filter from a Nissan Juke. Open the glove compartment and unclip the end stop arms. Then, use a screwdriver to remove the securing screws. After completing the previous steps, unscrew the side screws in the glove compartment and remove the plastic cover. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment away from the dashboard. Then, slide the air filter out of its housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos