Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Smart 450?

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper on a Smart 450, loosen the three bolts located immediately under the tailgate of the boot. Next, loosen the bolts found on the outer edges of the wheel arches and at the bottom of the bumper; these are mostly Torx screws size 25. Once all the previously indicated screws have been removed, you can detach the bumper and remove it from its housing.

After the old bumper has been removed, replace it and secure it with all the appropriate screws.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper on Smart Fortwo 450
How to Remove the Rear Bumper on Smart Fortwo 450
Smart (1998-2007 / 450) In this video, see how to remove the rear bumper from a Smart Fortwo 450 by following the instructions below. First, open the boot lid and remove the…
How to Remove the Front Bumper on a Smart 450?
How to Remove the Front Bumper on a Smart 450?
Smart (1998-2007 / 450) To remove the front bumper on a Smart 450, pry to detach the grille located between the number plate and the front headlights. By removing the grille…
How to Remove the Engine from the Smart 450?
How to Remove the Engine from the Smart 450?
Smart (1998-2007 / 450) To remove the engine from the Smart 450, open the rear hatch of the car to access the screws that secure the rear bumper. The bumper must be removed,…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos