Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the air fan on Smart Fortwo

Model: Smart Smart 453 - Years 2014-2022
Part: Blower motor

Hello! Today we will explain a maintenance that many believe to be difficult but which actually takes very little time. On this car model, the air vent is located near the accelerator pedal, a little above and a little to the right of it. Changing this fan is actually a very simple job: just unscrew the fan itself, by hand (with a little force), and disconnect the wiring. To mount the new piece you have purchased, it will therefore be necessary to screw the fan after connecting it. Put it back correctly, as it was the original piece. The only difficulty is the hidden position of the fan.

Posted on 26 December 2021 by ScegliAuto

Video tutorial

Related tutorials

Removing Air Fan on Smart Fortwo
Removing Air Fan on Smart Fortwo
Smart (2007-2015 / 451) Is the air fan on your Smart Fortwo damaged? Not working? Here's how to remove it. Use a lever to remove the plastics under the dashboard on the stee…
How to Replace the Fan Resistor on a Smart Fortwo
How to Replace the Fan Resistor on a Smart Fortwo
Smart (1998-2007 / 450) How to replace the fan resistor on a Smart Fortwo? Follow this guide for disassembly. Use a lever to remove the plastic under the dashboard, then uns…
Removing the engine filter on Smart Fortwo
Smart (2007-2015 / 451) Removing the engine air filter? We remove the engine air filter of the Smart Fortwo located in the engine compartment. We open the engine compartment…

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos