Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to reset the service light of the Smart Forfour

Smart - Video tutorial

Model: Smart Smart 453 - Years 2014-2022
Part: -board computer
Operation: How to reset the service light of the Smart Forfour

If you want to quickly and easily reset the maintenance warning light on your Smart Forfour, all you have to do is follow the instructions in our new mini guide carefully. First insert the key and turn on the car ignition only. Then scroll through the on-board computer menu until you find "Messages and service". At this point, press and hold the "OK" button on the left side of the steering wheel. As soon as the display stops flashing, release the button and switch off the ignition. The reset was completed successfully and from the next start you will no longer notice the light coming on.


Posted on 14 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Smart 2003-2005 - What to do if all the warning lights come on in the Smart car? Read Answer
    • Smart 2007-2015 - What to do if you have access problems with the Smart 451 car? Read Answer
    • Smart 1998-2007 - Where can you find the explanation of the indicator lights of the Smart 2002? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos