Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio of the Smart

Model: Smart Smart 451 - Years 2007-2015
Part: Car stereo

Remove the central console button panel, using a screwdriver, remembering to disconnect the power connector. Unscrew the screw on the back. Now pivot with the screwdriver to be able to extract the plastic mask. Use a torx t15 screwdriver to remove the 4 screws that hold the radio in its housing. Take out the car stereo. Disconnect the power connectors and the antenna cable. We install the new car radio, using the original cover, (it is good for 2 din structures), making sure to reconnect the new contacts properly.

Posted on 3 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Remove the car stereo of a Smart fortwo
Remove the car stereo of a Smart fortwo
Smart (1998-2007 / 450) Remove the car stereo from the Smart Fortwo? We disassemble the car radio and assemble a new one. We use the original or aftermarket metal keys to di…
How to replace the Smart 450 car radio
How to replace the Smart 450 car radio
Smart (1998-2007 / 450) In today's video we see how to install a two din car radio in the first series of Smarts, or the 450. This operation will allow you to modernize your…
How to disassemble and replace the radio of the Smart Fortwo
How to disassemble and replace the radio of the Smart Fortwo
Smart (1998-2007 / 450) Today's instructions will show us how to disassemble and replace the stock radio of the Smart Fortwo. First, we get into the car and start removing t…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos