Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the spark plugs of the Smart Fortwo?

Model: Smart Smart 450 - Years 1998-2007
Part: Spark plugs

Let's see in this guide the main steps that will allow us to disassemble and replace the Smart Fortwo spark plugs. First of all we access the rear part of our car, so that we can disassemble and remove the pipettes or the electrical connectors of the spark plugs; then we use a socket wrench with extension to unscrew and remove our spark plugs, as shown in the video. At this point we are going to install the new candles, having the right thermal gradation; now we screw by hand and then tighten with a key, following the video tutorial until the end for reassembly!

Posted on 12 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plugs of a Smart ForTwo
How to replace the spark plugs of a Smart ForTwo
Smart (2007-2015 / 451) Before we begin, we will need to open the tailgate of our Smart ForTwo. So let's start by disassembling and removing the engine compartment cover. Af…
How do you replace the spark plugs on the Smart Fortwo?
How do you replace the spark plugs on the Smart Fortwo?
Smart (1998-2007 / 450) In order to replace the spark plugs on the Smart Fortwo, you need to open the tailgate of the luggage compartment, so that you can unscrew all the bo…
How do you replace the candles on the Smart Fortwo?
How do you replace the candles on the Smart Fortwo?
Smart (2007-2015 / 451) The replacement of the Smart Fortwo's spark plugs is done by opening the rear trunk and locating the engine at the back of the car. Here, it will be …

Other guides you may be interested in

How to Remove the Brake Disc on Mitsubishi Pajero

How to remove the brake disc along with the brake pads on a Mitsubishi Pajero? First, lift the vehicle on a column lift to a suitable height for working. Next, remove the wheel (using a telescopic spanner or air drill) with the respective bolts. Undo the locking bolt of the brake caliper, and remove it from the caliper support. Remove the caliper support from the wheel hub using a socket spanner. Once the brake disc is free, undo the screws with a fixed spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid pipes from the wheel assembly. Replace them with new parts (always use original and compliant parts). Prepare to install the new disc along with the respective pads, brake caliper, caliper support, etc.

Watch the video!


by ScegliAuto

More videos