Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How can I reset the tire pressure warning light on my Smart 453??

Smart - Video tutorial

Model: Smart Smart 453 - Years 2014-2022
Part: Tires
Operation: How can I reset the tire pressure warning light on my Smart 453??

As we can see in this short video, resetting the tire pressure warning light on a Smart Fortwo is very simple. The switching on of the aforementioned warning light signals an anomaly in the tire pressure value, which will therefore be below or above the standard values (from 1.8 to 2.5 bar). restore the correct pressure of all the tyres. Subsequently to reset this warning light, you will have to use the arrow keys and the ok button found on the left side of the steering wheel controls: go to the settings menu and click on the "Tyre pressure check" item, then on the question "Store current pressures as new indicative values ? " click yes and then ok. At this point, the light will be off again.


Posted on 29 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Smart 2007-2015 - How do you reset the tire pressure warning light on the Smart? Read Answer
    • Smart 2014-2022 - What to do if the tire pressure warning light comes on in the Smart? Read Answer
    • Smart 2014-2022 - Where is the tire inflation kit located in the Smart 453? Read Answer
    • Smart 2007-2015 - Where is the Smart 451 tire repair kit located? Read Answer
    • Smart 2014-2022 - Where can you find tire repair kits on a Smart ForTwo? Read Answer
    • Smart 1998-2007 - Where to find the Smart ForTwo (W450) jack? Read Answer
    • Smart 1998-2007 - Where to place the Smart 450 jack? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos