Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Smart 453

Model: Smart Smart 453 - Years 2014-2022
Part: Air filter

If you want to replace the air filter in the engine compartment of your Smart 453, just put into practice the steps described in the following guide dedicated to you. First, park your car safely and turn it off completely. Immediately after that, lift the hood and locate the box containing the air filter in the lower left area of the engine compartment. Unscrew the screws located at the corners of the cover and remove the latter. Finally, all that remains is to also remove the old filter and replace it with a new, perfectly compatible model. Finally, put the lid back on.

Posted on 10 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Smart 453
How to replace the air filter of the Smart 453
Smart (2014-2022 / 453) When the engine of your Smart 453 continues to overheat abnormally even at low speeds, it means it is time to replace the engine air filter as the cu…
How to replace the cabin filter of the Smart Fortwo 453.
How to replace the cabin filter of the Smart Fortwo 453.
Smart (2014-2022 / 453) If you own a Smart Fortwo 453 (year 2014-2022) and want to learn how to correctly replace the cabin air filter, all you have to do is carefully read …
Air filter replacement for the Smart 453
Air filter replacement for the Smart 453
Smart (2014-2022 / 453) To replace the air filter that feeds the engine of the Smart 453, open the rear hatch, unscrew the six screws that secure the trunk floor with a Torx…

Other guides you may be interested in

How to Replace the Tailgate Lift Support of the Porsche Cayenne

To perform this replacement, you need to remove the corner protectors and the upper one at the edge with the tailgate. Just pull them towards you to release the clips, then disconnect the various connectors. Now, you must remove the seal at the corner of your vehicle; this way, you will have access to the support to be replaced. Observe the mounting direction before removing the old part and installing the new one. Then, remove the bolts and install the new one, retracing the steps for reassembling the various components removed.

Watch the video!


by ScegliAuto

More videos