Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How do you remove the rear light from the Smart 453?

Smart - Video tutorial

Model: Smart Smart 453 - Years 2014-2022
Part: Tail light
Operation: How do you remove the rear light from the Smart 453?

In order to remove the rear light from the Smart 453 you have to go and lift the tailgate, so that you can have access to the small side screws that fix the light inside its seat: these screws must be loosened so that the corresponding light can be extracted from inside its housing. In order to be able to remove it completely, it will also be necessary to disconnect the connector in the rear part: the new optical assembly must be connected to it, so that it can then be inserted into its seat, fixing it with the appropriate screws.


Posted on 2 April 2023 by ScegliAuto



Removing the rear light on Smart Fortwo 453
Smart (2014-2022 / 453) In this video tutorial we will see how to disassemble the rear light on a Smart Fortwo 453, following these simple steps. First of all we open the bo
Smart Fortwo 453 rear view camera installation
Smart (2014-2022 / 453) In today's video we will see the instructions that will allow us to disassemble the rear view camera on a Smart Fortwo 453. First of all, let's get t
How do you reset the Service light on the Smart 453?
Smart (2014-2022 / 453) The operation to reset the Service light on the Smart 453 is performed by inserting the key into the ignition and turning it to turn on the instrumen

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos