Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Smart 450 car radio

Model: Smart Smart 450 - Years 1998-2007
Part: Car stereo

In today's video we see how to install a two din car radio in the first series of Smarts, or the 450. This operation will allow you to modernize your car but will make you lose the ashtray drawer. First we proceed by extracting the old car radio from the central console; at the same time we also remove the lower glove box. Remember to unplug the power connector. Then insert the new mask that will contain the car radio. We can proceed by installing the new car radio, using the same connectors. So let's finish the job with the test.

Posted on 5 December 2022 by ScegliAuto

Video tutorial

Related tutorials

Repair of a soft top on Smart 450
Repair of a soft top on Smart 450
Smart (1998-2007 / 450) If your Smart top (we are talking about a Smart 450) no longer moves, by pressing the appropriate button in the passenger compartment, the causes may…
How to remove the lambda probe from the Smart 450?
How to remove the lambda probe from the Smart 450?
Smart (1998-2007 / 450) In order to replace the lambda probe on the Smart 450, you need to open the tailgate, so that the carpet positioned immediately behind the seats can …
How to replace the key battery of a first series Smart.
How to replace the key battery of a first series Smart.
Smart (1998-2007 / 450) To replace the battery of the remote control of a first series Smart (Smart 450) it is necessary to carry out some simple steps. To start, as shown i…

How to Remove the Lambda Sensor on a BMW 7 Series

In this video, learn how to replace the lambda sensor on a BMW 7 Series. Lift the car using a column lift or jack, secure it at a comfortable working height, and ensure it is stable. Remove the plastic engine cover panel with a screwdriver, disconnect the power connector from the lambda sensor, and unscrew the sensor using a suitable wrench. Once you have removed the sensor from its housing, compare it with the new part. Install the new sensor with the appropriate wrench and reconnect the power connector. Finally, reinstall the soundproofing engine cover.

Watch the video!


by ScegliAuto

More videos