Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Engine Oil Level on a Smart Fortwo?

Model: Smart Smart 453 - Years 2014-2022
Part: Checks and maintenance

In this brief and simple guide, we will go through the steps to check the engine oil level and top it up if necessary on a Smart Fortwo. First, open the rear hatch of the boot and start removing the engine cover panel; then lift the oil dipstick and clean it with a cloth. At this point, reinsert the dipstick and check that the oil level is at the maximum mark; if not, you will need to top it up or directly replace the engine oil, pouring in the correct amount!

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to perform the engine oil and oil filter change for the Smart Fortwo.
How to perform the engine oil and oil filter change for the Smart Fortwo.
Smart (2014-2022 / 453) To perform the oil and oil filter replacement on a Smart Fortwo vehicle, we need to open the trunk and remove the cover to access the components. We …
How to Check Engine Oil in the Smart
How to Check Engine Oil in the Smart
Smart (1998-2007 / 450) In today's video, you will learn how to check the oil level in the Smart Fortwo. First, remember to perform this operation with the engine cold for a…
How to Check the Radiator Fluid Level of the Smart 451
How to Check the Radiator Fluid Level of the Smart 451
Smart (2007-2015 / 451) In this video, you will learn how to check the radiator fluid level of the Smart 451. Open the engine compartment by releasing the two levers as show…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - How do you unlock the Smart Fortwo immobilizer? Read answer
    • Smart 1998-2007 - Where is the horn of the Smart 450 located? Read answer
    • Smart 1998-2007 - Where is the jack on a Smart ForTwo? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos