Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Smart Forfour?

Model: Smart Forfour W454, MK 1 - Years 2004-2006
Part: V-belt

To replace the serpentine belt on a Smart Forfour, loosen the screws that secure the front wheel to its housing, then remove the inner wheel arch lining. Here, you can remove the serpentine belt from the respective pulleys and the alternator. This will allow you to position the new replacement part, ensuring it rotates correctly. Once the new serpentine belt is in place, reassemble all components that were previously removed.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Know the Fuse Diagram of a 2004 Smart Forfour
Smart Forfour (2004-2006 / W454, MK 1) The fuse panel of a 2004 Smart Forfour is located inside the vehicle's cabin, specifically behind the dashboard at the lower left of the steering whe…
How to Remove and Replace the Speakers on the Smart Forfour
How to Remove and Replace the Speakers on the Smart Forfour
Smart Forfour (2014-2021 / MK 2, W453) Today's guide will show you the steps to remove and replace the speakers in the Smart Forfour. First, open the front door and begin by removing the d…
Where are the fuses located in the Smart Forfour?
Where are the fuses located in the Smart Forfour?
Smart Forfour (2004-2006 / W454, MK 1) The fuses of the Smart Forfour are contained inside the appropriate fuse boxes that are installed on board the vehicle: in this type of vehicle it wi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos