Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Smart
  4. :
  5. Smart
  6. : Where is the crankshaft position sensor located in the Smart ForTwo?

Smart - Video tutorial

Model: Smart Smart 450 - Years 1998-2007
Part: Crankshaft RPM sensor
Operation: Where is the crankshaft position sensor located in the Smart ForTwo?

In this video, we can see where the engine speed sensor is located in the Smart ForTwo, which is useful in case we need to replace it. As shown, the sensor is positioned in the upper left area of the engine, but accessing it will require removing the intercooler, EGR valve, and the control unit, which can be quite time-consuming. However, replacing the sensor itself is very simple. We just need to disconnect the power connector, unscrew the two mounting bolts, and follow the reverse procedure. Of course, make sure to work with the engine completely cooled down.


Posted on 11 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Smart 2003-2005 - What to do if the Smart 452 engine speed sensor does not work? Read Answer
    • Smart 1998-2007 - Where is the engine speed sensor of the Smart 450 petrol? Read Answer
    • Smart 1998-2007 - Where is the speed sensor located in the Smart 450? Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos