Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
450
- Years 1998-2007 In this tutorial, we can see how to disassemble the door handle in the Smart ForTwo, a very simple and quick operation. First of all, we open the door in which we will be working, obviously from the inside if it is damaged, then we locate the two rear screws and unscrew them using a Torx screwdriver. We then grip the handle, pull it outward, and separate it from the door. At this point, all that remains is to disconnect the lock rope, attach the replacement one, and install it by following the exact reverse procedure.
Posted on 29 November 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |