Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air filter replacement for Smart 450

Model: Smart Smart 450 - Years 1998-2007
Part: Air filter

To replace the air filter that feeds the injection system of the Smart 450 engine, we open the rear hood, lift the lining, unscrew the screw that locks the engine partition and remove it. We find the filter box on our left, with the help of a screwdriver we release the four clips on the sides of the cover and remove it. We release the block that secures the cylindrical filter and remove it, clean the inside of the box with a vacuum cleaner, insert the new filter and lock it, put back the cover, attach the clips, reassemble the partition and the lining.

Posted on 28 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Smart 450
How to replace the air filter of the Smart 450
Smart (1998-2007 / 450) If you do not want to have problems with overheating or loss of power of the engine of your Smart 450 then you must necessarily replace the air filte…
Where is the Smart 450 fuse box located
Where is the Smart 450 fuse box located
Smart (1998-2007 / 450) In this video we can see where the fuse box of the Smart 450 is located. In the Smart 450 we can find two fuse boxes: one positioned on the driver's …
Smart Fortwo 450 headlight bulb replacement
Smart Fortwo 450 headlight bulb replacement
Smart (1998-2007 / 450) In this short video we will see the instructions necessary for the disassembly and replacement of the headlight bulb on the Smart Fortwo 450, first g…

Other guides you may be interested in

How to Replace the Window Switch Button on a Mercedes C-Class

How do you remove the window switch button located in the driver side door panel of a Mercedes C-Class? This video explains how to proceed. Before starting the disassembly, disconnect the battery terminals in the engine compartment (if you need to disconnect electrical connectors). Use a plastic trim tool to pry between the button and the plastic of the switch panel. Once you have removed the button from the switch panel, install the new button inside (push and lock it into the designated plastic). Test the button to ensure it functions correctly.

Watch the video!


by ScegliAuto

More videos