Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Brake Disc of the Ssangyong Rexton?

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Brake rotors

See other generations:
Video tutorial

To remove the rear brake disc of the Ssangyong Rexton, loosen all the bolts securing the corresponding rear wheel to its hub, then remove the wheel from its housing. Once the wheel is removed, proceed to loosen the screws securing the brake caliper to its disc.

After removing the caliper, loosen the additional bolts securing the brake disc to its housing, completely detaching it. The new replacement part can now be inserted, followed by repositioning the brake caliper and the corresponding wheel.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wheel Bearing on a Ssangyong Rexton
How to Replace the Front Wheel Bearing on a Ssangyong Rexton
SsangYong Rexton (2001-2017 / MK 1) This brief and simple guide provides instructions to remove and replace the front wheel bearing on a Ssangyong Rexton. First, lift the vehicle and re…
How to Replace the Rear Shock Absorber on the Ssangyong Rexton?
How to Replace the Rear Shock Absorber on the Ssangyong Rexton?
SsangYong Rexton (2001-2017 / MK 1) To replace the rear shock absorber on the Ssangyong Rexton, lift the vehicle with a jack or ramp so that the corresponding wheel is not in contact wi…
How to Replace the Rear Light Bulb on a SsangYong Rexton
How to Replace the Rear Light Bulb on a SsangYong Rexton
SsangYong Rexton (2001-2017 / MK 1) To replace the rear light bulb on a SsangYong Rexton, open the boot to access the screws securing the rear light in its housing. Once these screws ar…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos