Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads of the Ssangyong Musso

Model: SsangYong Musso Q200 - Years: 2018, 2019, 2020, 2021, 2022, 2023
Part: Brake pads

See other generations:
Video tutorial

Today in this guide we will discover step-by-step instructions on how to disassemble and replace the front brake pads of the Ssangyong Musso. First, lift the vehicle and remove the front wheel; then proceed to unscrew the rear screws of the front brake caliper, removing it from the brake disc (applying pressure on the caliper piston to retract it), as shown in the video.

At this point, remove the old brake pads, replacing them with new original ones; clean the caliper from any residual dirt, then reassemble the caliper onto the disc.


Posted on 22 October 2025 by ScegliAuto


Related tutorials

How to reset the service in the SsangYong Musso pick-up?
How to reset the service in the SsangYong Musso pick-up?
SsangYong Musso (2018-2023 / Q200) In this tutorial we can see how to reset the service in the SsangYong Musso pick-up, an extremely simple and quick operation, to be carried out only …
What is the Fuse Diagram for the Ssangyong Musso?
SsangYong Musso (1993-2005 / FJ) In this video, you will see the fuse diagrams for the Ssangyong Musso and the locations of their respective fuse boxes, useful in case you need to ch…
Localization and diagram of the fuse boxes of the Ssangyong Musso
Localization and diagram of the fuse boxes of the Ssangyong Musso
SsangYong Musso (1993-2005 / FJ) In this video, we see where the fuse boxes of the Ssangyong Musso are located. We find the box located inside the cabin, on the left side of the driv…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos