Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter in a Ssangyong Kyron

Model: SsangYong Kyron MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

Video tutorial

In this video tutorial, see how to replace the pollen filter in a Ssangyong Kyron by following some simple steps: first, purchase a new pollen filter from an authorised dealer; next, get inside the vehicle, turn off the car, and pull the handbrake. The pollen filter in this vehicle is located inside the car behind the glove compartment, so you need to remove the right side of the dashboard using a screwdriver, unscrew the two screws to separate the glove compartment assembly; open the glove compartment.

Unscrew the six screws and remove the glove compartment (lower it without removing it completely); remove the filter cover and then take out the two filters (remove the first and slide out the second). Position the new filters according to the arrow indications.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a Ssangyong Kyron?
How to Replace the Cabin Filter in a Ssangyong Kyron?
SsangYong Kyron (2005-2014 / MK 1) Replacing the cabin filter in a Ssangyong Kyron, as shown in this tutorial, is an extremely simple and quick task. First, using a flathead screwdrive…
How to reset the partial odometer in the SsangYong Kyron?
How to reset the partial odometer in the SsangYong Kyron?
SsangYong Kyron (2005-2014 / MK 1) In this tutorial we can see how to reset the partial odometer in the SsangYong Kyron, an extremely simple and quick operation. This odometer can be v…
How to Replace the Rear Light Bulbs on the Ssangyong Kyron
How to Replace the Rear Light Bulbs on the Ssangyong Kyron
SsangYong Kyron (2005-2014 / MK 1) In this brief and simple guide, you will find instructions on how to remove and replace the rear light bulbs on the Ssangyong Kyron. First, open the …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos