Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Ssangyong Rexton

Model: SsangYong Rexton MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

In this new guide dedicated to your Ssangyong Rexton (2012-2016), you will learn step by step how to correctly perform the manual reset of the TPMS light that appears on the instrument panel. First, ensure that all four tyres are inflated to the correct pressure and that there are no punctures.

Then, enter the cabin and start the engine. Drive for a few miles at a minimum speed of 12 mph and turn off the engine, leaving only the ignition on. Finally, press and hold the button located below the speedometer and release it as soon as the light reset is complete.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure light on the Ssangyong Rexton?
How to reset the tyre pressure light on the Ssangyong Rexton?
SsangYong Rexton (2017-2026 / MK 2) To clear the tyre pressure light on the Ssangyong Rexton, inflate the tyres to the optimal pressure value, which is indicated on the sticker affixed …
How to reset the tyre pressure warning light on the Ssangyong Rexton?
How to reset the tyre pressure warning light on the Ssangyong Rexton?
SsangYong Rexton (2001-2017 / MK 1) To reset the tyre pressure warning light on the Ssangyong Rexton, first inflate the tyres to the recommended pressure value: this value is found on t…
Removing the Exterior Mirror on Ssangyong Rexton
Removing the Exterior Mirror on Ssangyong Rexton
SsangYong Rexton (2017-2026 / MK 2) As with many other car models, replacing the mirror on the Ssangyong Rexton is straightforward. For protection, you may start by placing masking tape…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos