Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Ssangyong Kyron

Model: SsangYong Kyron MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

Video tutorial

This guide will show you how to remove and replace the front door panel of a Ssangyong Kyron in simple steps. First, open the front door and begin unscrewing all the fastening screws found on the panel, as well as on the sides and handles.

Then, pry at the side of the panel to detach and remove it, as shown in the video. At this point, disconnect the handle cable and the electrical connector for the window switch; this will give you access to the speaker and lock, applying the reverse procedure for reassembly!


Updated on 30 September 2026 by ScegliAuto


Related tutorials

Where is and how to reach the fuse box of a SsangYong Kyron?
Where is and how to reach the fuse box of a SsangYong Kyron?
SsangYong Kyron (2005-2014 / MK 1) The fuse box of a SsangYong Kyron is located on the right side of the engine compartment. To access it, open the front hood and locate the protective…
How to Remove the Radio from a Ssangyong Kyron
How to Remove the Radio from a Ssangyong Kyron
SsangYong Kyron (2005-2014 / MK 1) In this video tutorial, follow these simple steps to remove the radio from a Ssangyong Kyron. First, get inside the vehicle and remove the screws fro…
How to Replace the Cabin Filter in a Ssangyong Kyron?
How to Replace the Cabin Filter in a Ssangyong Kyron?
SsangYong Kyron (2005-2014 / MK 1) Replacing the cabin filter in a Ssangyong Kyron, as shown in this tutorial, is an extremely simple and quick task. First, using a flathead screwdrive…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos