Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Subaru XV key remote control

Model: Subaru Xv MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

Let's discover the main instructions on how to disassemble and replace the battery of the Subaru XV key remote. First, we take our remote and start by removing the physical key from it; then we pry open the remote in two parts using the slot created, thus accessing the battery compartment, as shown in the video.

At this point, we remove and replace the battery with a new one, of the correct type (in this case a CR 2032 3V); we insert it in the correct direction and reassemble the remote, checking the operation of all commands!


Posted on 9 January 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a 2020 Subaru
How to Replace the Key Battery of a 2020 Subaru
Subaru Xv (2012-2017 / MK 1) The procedure for replacing the battery of a Subaru key/remote is the same for all vehicles from the same manufacturer. Today, we will specifically l…
How to Replace the Remote Battery of the Subaru XV Crosstrek?
How to Replace the Remote Battery of the Subaru XV Crosstrek?
Subaru Xv (2012-2017 / MK 1) Replacing the battery of the Subaru XV Crosstrek remote is a very simple and quick task. You will need a small flathead screwdriver and a replacement…
How to Replace the Battery in a Subaru XV?
How to Replace the Battery in a Subaru XV?
Subaru Xv (2012-2017 / MK 1) To replace the battery in a Subaru XV, open the bonnet to access the engine bay: the battery is located inside, near the left front headlamp. To remo…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos