Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the partial odometer of the Subaru Impreza WRX?

Model: Subaru Impreza MK 5 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

See other generations:
Video tutorial

In order to reset the partial odometer of the Subaru Impreza WRX, you need to turn on the instrument panel by inserting the ignition key into the ignition switch and turning it: once the panel is turned on, you will notice that the partial odometer will appear above the total one. To reset the former, you need to hold down the button on the right side of the instrument panel, next to the speedometer: once the button has been held down for a few seconds, you can release it and turn off the panel.


Posted on 5 March 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Subaru Impreza WRX
How to Replace the Key Battery of the Subaru Impreza WRX
Subaru Impreza (2016-2023 / MK 5) To replace the battery inside your Subaru Impreza WRX key, follow the procedure outlined in this guide. Before starting, ensure you have a small flat…
Where is the fuse box of the Subaru Impreza located?
Where is the fuse box of the Subaru Impreza located?
Subaru Impreza (2016-2023 / MK 5) In this new guide, we will help you easily locate the fuse box inside the cabin of your Subaru Impreza. First of all, enter the car and reach the dri…
How to Replace the Rear Light Bulb on a Subaru Impreza
How to Replace the Rear Light Bulb on a Subaru Impreza
Subaru Impreza (2007-2011 / MK 3) Before you start, open the rear hatch of your Subaru Impreza. Begin by prising up and moving the carpet near the rear light. Next, rotate the base of…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos