Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Store Tyre Pressure on a Subaru Levorg

Model: Subaru Levorg VM - Years 2014-2020
Part: Onboard computer

The function described in the video allows you to save up to three different sets of tyre pressures in the car's memory. This is perfect if you have a set of summer tyres, a set of winter tyres, and perhaps a third set for a trailer with sensors, or a set for high performance. To store a set of pressures, fit the set of tyres you want to save and adjust their pressure to the correct values. Turn on the vehicle's ignition and locate the button panel, which is found on the lower left side. Briefly press the TPMS button to cycle through the different memories: S1; S2; S3. Choose the free slot you prefer by pressing and holding the same button for a few seconds. The dashboard light will flash and display a confirmation message, indicating that the current pressures have been successfully saved in that slot. When you refit that specific set of tyres, simply select the memory slot, and the car will use the stored reference values, avoiding false alarms.

Posted on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS on the Subaru Levorg
How to Reset the TPMS on the Subaru Levorg
Subaru Levorg (2014-2020 / VM) Before starting to reset the light on the Subaru Levorg, check and adjust the tyre pressures according to the manufacturer's recommended values. Then…
What is the Fuse Diagram for the Subaru Levorg?
What is the Fuse Diagram for the Subaru Levorg?
Subaru Levorg (2014-2020 / VM) In this video, we can see where the fuse boxes of the Subaru Levorg are located and their respective diagrams, useful in case you need to check the f…
How to Replace the Remote Battery of a Subaru Levorg?
How to Replace the Remote Battery of a Subaru Levorg?
Subaru Levorg (2014-2020 / VM) Replacing the remote battery of a Subaru Levorg is an extremely simple and cost-effective operation. To do this, you will need a small flat-head scre…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos