Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Apply Yellow Film to the Fog Lights of a Subaru BRZ

Model: Subaru Brz MK 1, ZN6.ZC6 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Fog lights

Video tutorial

Let's see how to apply yellow film to the fog lights of the Subaru BRZ: first, obtain yellow-transparent vinyl film (it costs a few pounds online). Without removing the bumper, insert a plastic lever between the bumper and the fog light housing.

Pry in various points to release the fixing clips, working gently. Clean the fog light lens thoroughly with a clean cloth to remove dust and dirt, then take the roll of vinyl and cut a piece larger than the lens, leaving a border of about 2-3 cm, which will be trimmed later.

Using a hairdryer on medium heat, shape the film over the lens, starting from the centre and pushing the air out towards the edges to ensure a perfect fit. Once it adheres perfectly, trim the excess edges. Refit the housing by pressing firmly until all clips snap back into place.


Posted on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in the Subaru BRZ
How to Replace the Key Battery in the Subaru BRZ
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) If you want to replace the battery inside your Subaru BRZ key yourself but are unsure of the steps to take, just follow the instructions below. First…
How to disassemble the front door panel of the Subaru BRZ
How to disassemble the front door panel of the Subaru BRZ
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) The following steps will show us how to disassemble and remove the front door panel of the Subaru BRZ. First, we open the front door of the car and s…
What is the Fuse Diagram for the Subaru BRZ?
What is the Fuse Diagram for the Subaru BRZ?
Subaru Brz (2012-2023 / MK 1, ZN6.ZC6) In this video, we can see where the fuse boxes are located in the Subaru BRZ and their respective diagrams, useful in case you need to check the fuse…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos