Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Right Front Door Panel on a Subaru Impreza

Model: Subaru Impreza MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

Remove the right front door panel on a Subaru Impreza. Use a screwdriver to unscrew the screws located in the area of the upper door handle and the screws in the handle (after removing any plastic screw covers).

Remove the trim near the window, unscrew the remaining screws on the door panel, and detach the retaining clips. Finally, pull the panel off by hand and disconnect the wiring harness and the opening cable.

Carry out the desired maintenance inside the door.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

…
Subaru Impreza (2001-2007 / MK 2) We will explain how to remove the door panel of a 2005 Subaru Impreza. We start by removing the panel by releasing the side plastics and then releasi…
Subaru Impreza (2007-2011 / MK 3) Before you start, open the rear hatch of your Subaru Impreza. Begin by prising up and moving the carpet near the rear light. Next, rotate the base of…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos