Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rocker Cover Gasket

Model: Subaru Legacy BK, BG, BD, MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998
Part: Cylinder head

See other generations:
Video tutorial

To remove the first rocker cover, first remove the air filter cover along with the intake duct housing the mass air flow sensor. Once disassembled, access the fixing pins of the rocker cover: unscrew the pins and remove the cover (you will notice oil seepage along the edges).

Remove the old gasket and clean the cover thoroughly before inserting the new one. In addition to the gasket along the edge, the oil seals through which the fixing pins pass must also be replaced. Once the replacement is complete, reposition the cover in its place and tighten the fixing pins.

To remove the other cover, first remove the battery and proceed in the same way.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Engine Air Filter Replacement
Engine Air Filter Replacement
Subaru Legacy (2009-2014 / BM, BR, MK 5) The air filter housing is located at the front right of the engine bay (when viewed from the front), just behind the headlamp; unclip the metal clips…
Timing Belt Replacement and Water Pump Removal and Replacement
Timing Belt Replacement and Water Pump Removal and Replacement
Subaru Legacy (2003-2009 / BL, MK 4, BP) The following video shows how to replace the timing belt on a Subaru Legacy. The water pump is also removed and replaced. First, remove the timing co…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Subaru Legacy (2009-2014 / BM, BR, MK 5) Position the vehicle on a lift and remove the plastic cover under the engine. Unscrew the drain plug located at the centre of the oil sump and collec…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos