Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Subaru Legacy

Model: Subaru Legacy BM, MK 5, BR - Years 2009-2014
Part: Battery

If you need to replace the battery on this model of vehicle, the description below provides the instructions and steps to safely carry out the replacement. First, open the bonnet; the battery is located on the left side. First, remove the nuts securing the upper plate, then disconnect the negative terminal followed by the positive terminal. Remove the battery from the compartment and replace it with the new one, then reconnect the positive terminal first and the negative terminal last, and finally re-secure the upper plate.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the battery of the Subaru Legacy key remote control
How to change the battery of the Subaru Legacy key remote control
Subaru Legacy (2014-2019 / BN, MK 6, BS) In a few simple steps, we will see how to disassemble and replace the battery of the Subaru Legacy key remote. First, take your remote and start by r…
How to Replace the Rear Shock Absorber on a Subaru Legacy
How to Replace the Rear Shock Absorber on a Subaru Legacy
Subaru Legacy (2009-2014 / BM, MK 5, BR) Before you start, lift the rear end of your Subaru Legacy. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, using a ja…
How to replace the battery of the Subaru Legacy key remote control
How to replace the battery of the Subaru Legacy key remote control
Subaru Legacy (1999-2004 / BE, MK 3, BH) This brief and simple guide will show us the process of disassembling and replacing the battery of the Subaru Legacy key remote. First, we take our r…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos