Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time in a Subaru Legacy?

Model: Subaru Legacy BN, BS, MK 6 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Clock

See other generations:
Video tutorial

In this tutorial, you will see how to set the time in a Subaru Legacy, a very simple and quick operation, to be done after disconnecting the battery or when switching to daylight saving time. First, enter the cabin, then insert the key and turn on the instrument panel.

Next, access the settings menu using the directional controls on the steering wheel, go to "Clock", "Adjust Time", and set the clock as needed. In the previous screen, you can also adjust the date and various formats.


Posted on 12 May 2026 by ScegliAuto


Related tutorials

How do you set the clock of the Subaru Legacy?
How do you set the clock of the Subaru Legacy?
Subaru Legacy (2009-2014 / BM, BR, MK 5) To adjust the clock of the Subaru Legacy, you will need to turn on the instrument panel so that you can use the controls located on the central dashb…
Where to Find the OBD Port of the Subaru Legacy 2011
Where to Find the OBD Port of the Subaru Legacy 2011
Subaru Legacy (2009-2014 / BM, BR, MK 5) If you do not know where the OBD port of your 2011 Subaru Legacy is located, do not worry because this guide will help you find it without any diffic…
How to Replace the Rear Shock Absorber on a Subaru Legacy
How to Replace the Rear Shock Absorber on a Subaru Legacy
Subaru Legacy (2009-2014 / BM, BR, MK 5) Before you start, lift the rear end of your Subaru Legacy. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, using a ja…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos