Do it yourself
Frequently asked questions about cars and motorcycles

How do you set the clock of the Subaru Legacy?

Model: Subaru Legacy BM, MK 5, BR - Years 2009-2014
Part: Clock

To adjust the clock of the Subaru Legacy, you will need to turn on the instrument panel so that you can use the controls located on the central dashboard panel to change the settings. You will need to press and hold the button next to the one for activating the heated seats, noting that the minutes will start to advance. When they reach 59, they will stop and you will need to press the button again, noticing that the hours will also advance. Once the correct time has been set, you can release the button.

Posted on 24 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Subaru Legacy (2014-2019 / BN, MK 6, BS) In this tutorial, you will see how to set the time in a Subaru Legacy, a very simple and quick operation, to be done after disconnecting the battery …
Subaru Legacy (2009-2014 / BM, MK 5, BR) Before you start, lift the rear end of your Subaru Legacy. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, using a ja…
Subaru Legacy (2009-2014 / BM, MK 5, BR) If you do not know where the OBD port of your 2011 Subaru Legacy is located, do not worry because this guide will help you find it without any diffic…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos