Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Lumbar Support on the Subaru Legacy Seat

Model: Subaru Legacy BM, BR, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014
Part: Seat

See other generations:
Video tutorial

This guide outlines the steps to repair the lumbar support on the driver’s seat of the Subaru Legacy, which also applies to the passenger seat. First, open the rear door to access the back of the seat.

Remove the rear cover of the seat to access the lumbar support, as shown in the video. Check the condition of the lumbar support, ensuring the support hooks are attached and in good condition.

If necessary, replace the entire support with a new one and reassemble everything!


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the Subaru Legacy 2011
Where to Find the OBD Port of the Subaru Legacy 2011
Subaru Legacy (2009-2014 / BM, BR, MK 5) If you do not know where the OBD port of your 2011 Subaru Legacy is located, do not worry because this guide will help you find it without any diffic…
How to Replace the Rear Shock Absorber on a Subaru Legacy
How to Replace the Rear Shock Absorber on a Subaru Legacy
Subaru Legacy (2009-2014 / BM, BR, MK 5) Before you start, lift the rear end of your Subaru Legacy. Begin by removing the rear wheel by unscrewing the relevant fixing bolts. Next, using a ja…
How to Replace the Fuel Pump in the Subaru Legacy?
How to Replace the Fuel Pump in the Subaru Legacy?
Subaru Legacy (2009-2014 / BM, BR, MK 5) As seen in this tutorial, replacing the fuel pump in the Subaru Legacy is an extremely simple and quick operation. First, open the bonnet, then remov…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos