Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Subaru XV 2.0 Diesel

Model: Subaru Xv MK 1 - Years 2012-2017
Part: Timing belt

In this tutorial, you will learn how to remove and replace the timing belt on a Subaru XV 2.0L Diesel. Open and lift the bonnet, then remove the protective cover of the timing belt and alternator by unscrewing the fixing screws; next, loosen the tensioner with a socket spanner and remove the timing belt as shown in the video. Now replace it with a new one of the correct type, ensuring it is fitted in the correct direction, always adjusting the tensioner during installation; finally, refit the cover and you're done!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a 2020 Subaru
How to Replace the Key Battery of a 2020 Subaru
Subaru Xv (2012-2017 / MK 1) The procedure for replacing the battery of a Subaru key/remote is the same for all vehicles from the same manufacturer. Today, we will specifically l…
Replacing the Air Filter on a Subaru XV
Replacing the Air Filter on a Subaru XV
Subaru Xv (2012-2017 / MK 1) As part of the regular maintenance for the Subaru XV, you need to replace the air filter element, which is important for keeping your engine efficien…
How to Remove the Glove Compartment Drawer on a Subaru XV
How to Remove the Glove Compartment Drawer on a Subaru XV
Subaru Xv (2012-2017 / MK 1) Before you begin, open the front passenger door of your Subaru XV. Start by opening the glove compartment using the designated handle. Next, unclip a…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos