Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Subaru Forester SH, MK 3 - Years 2008-2011
Part: Cabin air filter

The cabin air filter is located on the passenger side, behind the glove compartment: open the glove compartment door, detach the end stop piston, and fully tilt it while folding in the side tabs (lever with a screwdriver). At this point, extract the cabin air filter (drawer extraction) and insert the new one, ensuring the airflow direction is correct. Reverse the process to reassemble the glove compartment. It is also suggested to sanitise the cabin with a suitable germicidal spray: in addition to sanitising the cabin, it will provide a pleasant fragrance.

Updated on 8 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Subaru Forester (2008-2011 / SH, MK 3) The cabin air filter is located on the passenger side, behind the glove compartment. Open the glove compartment door, unclip the side stop arm and th…
Subaru Forester Cabin Air Filter Replacement
Subaru Forester Cabin Air Filter Replacement
Subaru Forester (2002-2008 / SG, MK 2) Today we will see, in this video tutorial, how to remove and replace the cabin air filter or the pollen filter of the Subaru Forester. First of all w…
Replacement of the cabin air filter of the Subaru Forester.
Replacement of the cabin air filter of the Subaru Forester.
Subaru Forester (2012-2019 / MK 4, SJ) The following steps will show us how to disassemble and replace the cabin air filter of the Subaru Forester. First, we get inside the vehicle on the …

Other guides you may be interested in

How to Remove the Front Bumper of a Subaru Impreza

Do you want to replace the front bumper of a Subaru Impreza? Follow this guide. Lift the bonnet and secure it. Using a socket wrench, unscrew the fastening bolts of the bumper located at the top as shown in the video. Once this is done, unscrew the screws of the splash guard located near the wheels, and finally remove the plastic pins/rivets at the bottom of the bumper. Remove the bumper from the vehicle body by hand. To proceed with the installation, position the bumper as shown in the video and tighten all screws around the splash guard and the perimeter.

Watch the video!


by ScegliAuto

More videos