Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Subaru Forester service light

Model: Subaru Forester MK 4, SJ - Years 2012-2019
Part: Service warning light

Below you will find a quick guide that will allow you to quickly and correctly reset the service light of your Subaru Forester. First insert the key and turn on the car ignition. Then, using the directional arrows on the steering wheel, scroll through the menu until you find the "Set" item. At this point, press and hold the "Set" button located in the lower left part of the steering wheel. Release it as soon as the new menu appears. Select the item "Maintenance" and immediately after "Maintenance Schedule". Finally, press and hold the "Set" button again until the reset is complete.

Posted on 22 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Subaru Forester service light
How to reset the Subaru Forester service light
Subaru Forester (2018-2025 / MK 5, SK) If you have just had your Subaru Forester serviced properly, but the warning light continues to illuminate at every start then you need to perform a …
Reset of the service light for the Subaru Forester
Reset of the service light for the Subaru Forester
Subaru Forester (2018-2025 / MK 5, SK) The following steps will allow us to reset the service light for the regular maintenance of the engine oil change for the Subaru Forester. First, let…
How do you reset the partial odometer of the Subaru Forester?
How do you reset the partial odometer of the Subaru Forester?
Subaru Forester (2012-2019 / MK 4, SJ) In order to reset the partial odometer of the Subaru Forester, you need to turn on the instrument panel by inserting the key into the ignition switch…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos