Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulb in a Subaru Impreza

Model: Subaru Impreza MK 5 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Interior dome light bulb

See other generations:
Video tutorial

To replace the separate light bulbs in the interior light of the Subaru Impreza, first remove the covers that protect the bulbs using a plastic tool, prying down from one side. Once the cover is off, remove the bulb by pushing the left side of the bulb to release it from the right side so it falls out (be careful not to break it). After removing the bulb, insert the new bulb by placing it in the left side first and then securing it in the right side, and finally, reinsert the cover by placing it in from one side and then securing it with the other.

Repeat the same process for the adjacent light. Now you can test the new bulbs.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the Subaru Impreza located?
Where is the fuse box of the Subaru Impreza located?
Subaru Impreza (2016-2023 / MK 5) In this new guide, we will help you easily locate the fuse box inside the cabin of your Subaru Impreza. First of all, enter the car and reach the dri…
How to Replace the Rear Light Bulb on a Subaru Impreza
How to Replace the Rear Light Bulb on a Subaru Impreza
Subaru Impreza (2007-2011 / MK 3) Before you start, open the rear hatch of your Subaru Impreza. Begin by prising up and moving the carpet near the rear light. Next, rotate the base of…
How to Replace the Remote Battery on a Subaru Impreza?
How to Replace the Remote Battery on a Subaru Impreza?
Subaru Impreza (2011-2016 / MK 4) To replace the battery in the remote for the Subaru Impreza, pry open the lower part of the device to remove the rear cover along with the key blade …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos