Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cabin filter in the Subaru WRX?

Model: Subaru Subaru Various
Part: Cabin air filter

Video tutorial

Replacing the cabin filter in the Subaru WRX is a very simple and cost-effective operation; let’s see how to proceed in this tutorial. Start by sitting in the passenger seat, then open the glove compartment, disconnect the damper on the right wall, and by pushing both sides inward, unclip the drawer from the dashboard.

Once done, locate the long horizontal door, open it by unlocking the two clips, and remove the old filter. Finally, clean the housing of any residue and insert the replacement in the correct orientation.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Subaru Subaru Various Today we will explain how to reset the oil light, related to the oil change on a Subaru WRX vehicle. Before performing this operation, it is necessar…
Subaru Subaru Various Activating and deactivating the driving assistant or Hill Hold on Subaru WRX/STI vehicles from 2015 onwards is a really simple and quick operation to…
Subaru Subaru Various In today's video, we will see how to replace the gear knob of the 2022 Subaru WRX. Removing the knob is a simple and quick operation to perform indep…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos