Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Headlamp Bulb Replacement

Model: Subaru Impreza MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

To access the bulbs of the left front headlamp, you must first remove the battery: ensure you have any necessary unlocking codes, such as for the radio, which are essential for reactivating it later; then disconnect the battery terminals and remove the relevant mounting bracket to take the battery out of its place: at this point, it is straightforward to access and proceed with the bulb replacement.

The side indicator bulb can be detached complete with its holder and then removed by pressing and twisting: in this case, a simple cleaning of the contacts was sufficient, but given the low cost of the bulbs, it is advisable to replace it.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Subaru Impreza
How to Replace the Front Headlamp Bulb on a Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) If you need to replace the front headlamp bulb on this model of car, follow the instructions provided in this description and refer to the images in …
Replacing Front Headlight Bulbs on Subaru Impreza
Replacing Front Headlight Bulbs on Subaru Impreza
Subaru Impreza (2011-2016 / MK 4) Are the front headlight bulbs on your Subaru blown? Here’s how to replace them. Open the front bonnet by pulling the lever located at the bottom righ…
How to Replace the Interior Light Bulb in a Subaru Impreza
How to Replace the Interior Light Bulb in a Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) To replace the separate light bulbs in the interior light of the Subaru Impreza, first remove the covers that protect the bulbs using a plastic tool,…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos