Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on a Subaru Forester

Model: Subaru Forester MK 4, SJ - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

Replacing the timing chain on any vehicle is quite complex and laborious and should be carried out by experienced personnel. If you wish to attempt this task, you can find the instructions outlined in this summary and in the video.

In this case, we first disassembled the engine and removed the auxiliary belt and protective covers. On this model with a boxer engine, there are two timing chains connecting the two camshafts.

It is crucial to lock both the crankshaft and camshaft with pins before removing the chain to maintain the timing for reassembly.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

When and How to Replace the Timing Belt on the Subaru Forester
When and How to Replace the Timing Belt on the Subaru Forester
Subaru Forester (2002-2008 / MK 2, SG) Today's guide will show you the useful information for removing and replacing the timing belt on the Subaru Forester; the manufacturer states that th…
Guide to Replacing the Timing Belt on the Subaru Forester 2.5L
Guide to Replacing the Timing Belt on the Subaru Forester 2.5L
Subaru Forester (2008-2011 / MK 3, SH) This short video will illustrate the main instructions that will allow you to remove and replace the timing belt and water pump on the Subaru Foreste…
How do you replace the timing belt on a Subaru Forester?
How do you replace the timing belt on a Subaru Forester?
Subaru Forester (2002-2008 / MK 2, SG) It will be possible to replace the timing belt of the Subaru Forester by lifting the car with a jack or a lift: this way, you can loosen the screws t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos