Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel of the Subaru Ascent?

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Door trim panel

To remove the door panel of the Suzuki Grand Vitara, you need to detach the cover located in the seat of the internal handle so that you can loosen the underlying fixing screw. Then, you will need to loosen the additional screws located at the bottom of the panel so that it can be released. You can then proceed to detach the panel, also disconnecting the underlying connectors. Once the old panel has been completely removed, you can connect the new one, positioning it on the door and fixing it with screws.

Posted on 7 April 2023 by ScegliAuto

Video tutorial

Related tutorials

Subaru Ascent front door panel removal
Subaru Ascent front door panel removal
Subaru Ascent (2018-2026 / MK 1) We see in this guide the instructions on how to disassemble and replace the front door panel of the Subaru Ascent, in simple steps. First of all, we …
How to change the cabin air filter of the Subaru Ascent
How to change the cabin air filter of the Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) The replacement of the cabin air filter of the Subaru Ascent is a very simple operation that can be done independently thanks to our video tutorial t…
Where is the spare tire on the Subaru Ascent?
Where is the spare tire on the Subaru Ascent?
Subaru Ascent (2018-2026 / MK 1) The spare wheel of the Subaru Ascent is positioned under the floor of the car, in correspondence with the luggage compartment. To be able to access i…

Other guides you may be interested in

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos