Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel on a Subaru Ascent

Model: Subaru Ascent MK 1 - Years 2018-2026
Part: Door trim panel

This guide provides instructions on how to remove and replace the front door panel on a Subaru Ascent in simple steps. First, open the front door and start removing the various plastic covers by unscrewing the screws underneath; once all screws are removed, pry on the sides of the panel to detach and remove it, disconnecting the handle cable and the electrical connector for the window switch, as shown in the video. At this point, reassemble the door panel by applying the reverse procedure!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Center Console Finish Panel of the Subaru Ascent Mk1
How to Remove the Center Console Finish Panel of the Subaru Ascent Mk1
Subaru Ascent (2018-2026 / MK 1) This guide shows how to disassemble the center console of the Subaru Ascent Mk1. The first step is to remove the storage tray under the center column…
How do you replace the battery of the Subaru Ascent remote control?
How do you replace the battery of the Subaru Ascent remote control?
Subaru Ascent (2018-2026 / MK 1) In order to replace the battery of the Subaru Ascent, you need to remove the key located at the bottom of the device, so that you can access its hous…
How to Replace the Tail Light Bulbs on the Subaru Ascent
How to Replace the Tail Light Bulbs on the Subaru Ascent
Subaru Ascent (2018-2026 / MK 1) Let's discover in this brief guide how to replace the tail light bulbs on the Subaru Ascent in simple and quick steps. First, open the rear hatch of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos