Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program a New Remote for the Subaru Impreza?

Model: Subaru Impreza MK 5 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

In this tutorial, you will see how to program a new remote for the Subaru Impreza. First, open the remote and note the first code printed on the internal circuit, then insert the key into the ignition barrel and turn on the ignition 10 times consecutively, leaving it off at the end. After hearing a beep, open the door, close it, and enter the previously noted code.

To do this, press the unlock button on the door as many times as the first value of the code and confirm with the lock button. Enter the entire code using the same technique, repeat the operation, and finally test the remote.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Subaru Impreza?
How to Replace the Remote Battery on a Subaru Impreza?
Subaru Impreza (2011-2016 / MK 4) To replace the battery in the remote for the Subaru Impreza, pry open the lower part of the device to remove the rear cover along with the key blade …
How to Replace the Key Battery on a Subaru Impreza
How to Replace the Key Battery on a Subaru Impreza
Subaru Impreza (2007-2011 / MK 3) If you intend to replace the battery in the remote key of your vehicle model, the description below provides all the instructions and operational met…
How to Replace the Remote Battery on a Subaru Impreza
How to Replace the Remote Battery on a Subaru Impreza
Subaru Impreza (2016-2023 / MK 5) In this tutorial, you can see how to replace the remote battery on a Subaru Impreza by following a few simple steps: first, purchase a CR1820 remote …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos