Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove and Reinstall the Air Chamber

Model: Subaru Outback BL, BP, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Air conditioning

See other generations:
Video tutorial

For this operation, you will need the following tools: 8-10mm socket set; stop teeth and extensions; spanner; trim. Start by opening the bonnet by pushing the lever located under the dashboard inside the car. Then, use the spanner to unscrew the screws holding the protective panel.

Next, disconnect the connectors attached to the air chamber. At this point, proceed to remove it by extracting all the screws that hold it in place.

To reinstall, simply reverse all the steps outlined above.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Subaru Outback (2003-2009 / BL, BP, MK 3) Open and lift the bonnet. Now, remove the air duct that directs air to the filter. Also, remove the belt covers, both the plastic and metal parts. To…
Subaru Outback (2014-2019 / BS, MK 5) Let’s discover the procedure necessary for removing and replacing the engine air filter of the Subaru Outback in simple steps. First, open the bonnet…
Subaru Outback (2003-2009 / BL, BP, MK 3) In this short guide, you will see how to remove and replace the cabin air filter on the Subaru Outback. First, access the front passenger compartment…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos