Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radiator from Your Car

Model: Subaru Outback BL, BP, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Radiator

See other generations:
Video tutorial

To remove the radiator, first remove the two plastic covers underneath that protect the engine. Then, undo the screw located on the right side under the radiator to drain the water inside.

Once emptied, move to the left side and disconnect the hoses near the radiator by removing the clips with pliers, allowing all the water to drain from the system. Next, go to the top where you remove the plastic cover over the radiator by extracting the plastic clips and disconnect the hose by loosening the clip with the screw.

Detach the water reservoir and then undo the bolts that hold it in place and lift it out. And that's how you have removed the radiator from your SUBARU OUTBACK.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Remove the Radiator from a Subaru Outback
How to Remove the Radiator from a Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) In this video, let's see how to remove the radiator. Secure the car on a column lift, raise it to the desired height, and begin by removing all the p…
How to Remove an Engine from a Subaru Outback
How to Remove an Engine from a Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) In this video, let's see how to remove an engine from a Hyundai. Position the car on a column lift, then remove the plastic engine cover and the air …
Replacing Front Headlight Bulb on Subaru Outback
Replacing Front Headlight Bulb on Subaru Outback
Subaru Outback (2003-2009 / BL, BP, MK 3) Let’s see how to replace the blown bulbs in the front compartment of the Subaru Outback. Open the front bonnet by pulling the lever located in the ve…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos