Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to replace the headlight bulb on the Suzuki GSX-R 600, a very simple and quick operation. First, let's make sure that the key is not inserted, in order to work safely. Then, we will remove the instrument panel by unscrewing the corresponding lower fixing bolt. Next, we disconnect the bulb's power connector, remove the circular rubber cap, and unclip the metal clip. At this point, we can remove the bulb itself, insert the replacement, and reassemble everything by following the reverse procedure.

Posted on 23 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Suzuki GSX-R 600
How to replace the headlight bulb of the Suzuki GSX-R 600
Gsx R 600 .. and replace the headlight bulb of the Suzuki GSX-R 600, installing a LED light. First, put the bike on the stand and start unscrewing the screws of the.. …
How do you replace the battery of the Suzuki GSX-R 600?
How do you replace the battery of the Suzuki GSX-R 600?
Gsx R 600 .. to replace the battery of the Suzuki GSX-R 600 by inserting the key into the side lock to release the seat from its position. Once the seat has.. …
How to disassemble the seat on the Suzuki GSX-R 600?
How to disassemble the seat on the Suzuki GSX-R 600?
Gsx R 600 .. can see how to remove the seat on the Suzuki GSX-R 600, an extremely simple and quick operation, to be carried out for example in case we need to access.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos