Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel in the Suzuki XL-7?

Model: Suzuki Suzuki Various
Part: Door trim panel

In this tutorial we can see how to disassemble the door panel in the Suzuki XL-7, an extremely simple and fast operation. First of all, we open the door in which we will work, then, using a screwdriver with a flat tip or preferably a plastic spatula, so as not to leave marks, we unhook the window switch panel and disconnect the connector. We then unscrew the indicated screws, remove the handle and disconnect the lock cord. At this point, all that remains is to lever along the entire perimeter of the panel and separate it from the door.

Posted on 21 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Side Window Glass from the Suzuki X90 Door
How to Remove the Side Window Glass from the Suzuki X90 Door
Suzuki Suzuki Various This guide provides instructions on how to remove and replace the front door side window glass of the Suzuki X90. First, open the front door of the v…
How to restore the central locking system of Suzuki vehicles
How to restore the central locking system of Suzuki vehicles
Suzuki Suzuki Various To reprogram the central locking on Suzuki vehicles from Japan, it is necessary to open the driver's door and get into the vehicle. After sitting in …
Where is the fuse box of the Suzuki Ciaz located?
Where is the fuse box of the Suzuki Ciaz located?
Suzuki Suzuki Various If you own a Suzuki Ciaz and want to locate the fuse box inside it by yourself, just follow the steps described below and apply them accordingly. Fir…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos