Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the remote key battery for the Suzuki Swift

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
This video is currently unavailable

This short and simple guide will show you how to disassemble and replace the battery in the remote key for the Suzuki Swift. First, take your remote and unscrew the screw located on the cover; then pry open the sides to separate the remote into two parts, accessing the circuit board and the battery, as shown in the video.

At this point, install the new battery, ensuring it is the correct type (in this case, a CR 1620 3V); insert it in the correct orientation and reassemble the remote, finally checking the operation of the buttons.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to replace the battery of the key remote for a Suzuki Swift
How to replace the battery of the key remote for a Suzuki Swift
Suzuki Swift (1994-2004 / MK 3) To replace the battery of the key remote for a Suzuki Swift car, you will need a small screwdriver with a star tip and a screwdriver with a flat head…
Programming the Suzuki Swift remote control
Programming the Suzuki Swift remote control
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) Let's see how to program the remote control for a Suzuki Swift: we will need the original remote control and the new one to be programmed. We complet…
How to change the battery of a Suzuki Swift key
How to change the battery of a Suzuki Swift key
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) In this video, we will see how to change the battery of a Suzuki Swift or SX4 key: first, we need to remove the physical key inside the remote by pre…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos